Featured Product
Garmin LiveScope LVS44 Transducer
Live scanning sonar transducer, the main subject of the video review
"In this video we are playing with the new live scope 2 by Garmin. More specifically the LVS 44 transducer."
Garmin LiveScope 2 LVS 44: Five Things You Need to Know Before You Buy
When Garmin released the LiveScope 2 lineup, anglers across North America had plenty of questions. Were the new transducers truly a meaningful upgrade, or just incremental refinements dressed up in fresh marketing? To find out, fishing content creator Jay Siemens took the new LVS 44 transducer on one of the most demanding field tests imaginable — a solo backcountry kayak adventure into a remote Manitoba lake, hauling gear over a steep hill to chase trophy splake in crystal-clear water. The result was equal parts grueling portage, genuine discovery, and some of the most impressive fish-finding footage LiveScope fans have seen yet.
What follows are the five things Siemens says every angler needs to know before purchasing the Garmin LiveScope 2 LVS 44 — drawn from hands-on time on the water, conversations with a Garmin field technician, and a day that produced five Master Angler–class splake to match five critical insights about the technology.
The Adventure That Put the LVS 44 to the Test
Getting to the lake wasn't easy. Siemens launched from one body of water and hauled his Old Town 120 Pro kayak overland to a second, stocked lake — solo, over a hill steep enough to send gear sliding back down and rocky enough to fill his shoes with stones. He used an Eskimo Pole System to string his gear together, attempting the crossing in a single trip.
"If it was easy, everybody'd be doing it," Siemens said, catching his breath on the slope, thighs burning, pants slipping.
The payoff was a lake largely untouched by fishing pressure, stocked for years with splake — a hybrid species crossing brook trout and lake trout — with legitimate specimens pushing past the 24-inch mark. Powered by a 50-amp-hour Norsk lithium battery, the kayak rig ran the LVS 44 through its paces all day on relatively clear water that demanded longer casts, sharper definition, and confident fish identification at depth. It was, in short, exactly the kind of environment where the differences between generations of sonar technology become impossible to ignore.
Mentioned in This Article
Norsk Lithium 50Ah 12V LiFePO4 Battery
50 amp-hour lithium battery used to power the fish finder and motor on the kayak
No. 1: The Black Box Is Gone — and That Changes Everything
The most immediately practical change in the LiveScope 2 lineup is also the one that gets discussed most: the GLS 10 black box module that previous LiveScope users know well has been completely eliminated from the LVS 44 setup. All the computing that used to happen inside that external module now occurs directly within the transducer itself.
The GLS 10 weighed approximately four pounds. For anglers running traditional boat setups, that might seem trivial. But for anyone ice fishing, kayak fishing, or making backcountry portages like Siemens tackled on this particular day, four pounds and a tangle of extra wiring is a meaningful burden — both physically and logistically.
"The rigging is simplified and you're shaving four pounds of weight," Siemens explained. "So it's a lot easier to hop around."
Setup is now a matter of plugging in the transducer's ethernet network cord and power cord — full stop. No separate module to mount, no additional wiring runs, no extra points of failure. For ice anglers who move frequently between holes and for kayak fishermen dealing with limited real estate, this simplification alone may justify serious consideration of the upgrade.
No. 2: A Wider Cone Angle Opens Up a Bigger Window
The second key difference between the LVS 34 and the new LVS 44 is a change in cone angle — and it's more significant than it might initially appear on a spec sheet.
The outgoing LVS 34 operated at 20 degrees by 135 degrees. The LVS 44 expands that to 20 degrees by 165 degrees in standard forward mode. That additional 30 degrees of horizontal coverage means you're painting a broader swath of water with every sweep, reducing the chance that fish slide out of your viewing window before you have time to react.
The change becomes even more dramatic when the transducer is switched into perspective mode. At that point, the LVS 44 opens up to a full 180-degree view, allowing anglers to see everything from hard left to hard right simultaneously. For anglers covering open-water structure, hunting roaming schools, or simply trying to keep more of the water column visible at once, this expanded field of view is a genuine operational advantage.
Siemens demonstrated the difference in real time during his splake session, using the wider angle to track fish moving laterally that would have drifted out of frame on the older transducer.
Mentioned in This Article
Norsk Lithium 30Ah 12V LiFePO4 Battery
30 amp-hour lithium battery referenced for run time calculations
No. 3: Cleaner Returns, Less Delay, Better Bottom Separation
This is perhaps the hardest improvement to quantify in a spec sheet but the easiest to appreciate on the water: the LVS 44 simply produces a cleaner, more coherent image than its predecessor.
Siemens described three distinct improvements under this umbrella. First, the stitching between cone angles is smoother — the visible seams that used to appear between adjacent scan zones on the LVS 34 are noticeably reduced, which means fish are less likely to disappear into those transition zones at critical moments. Second, there is a perceptible reduction in display lag. The image feels closer to real time, which matters enormously when tracking fast-moving species like splake or following a bait on a long cast through deep, clear water.
"There's just less delay," Siemens noted. "It feels more like real time. I don't know how to describe that."
The third improvement Siemens flagged came directly from a conversation with a Garmin field service technician who travels with the Bassmaster pros, helping rig their boats and dial in their units.
"One of the main things he noticed is being able to pick off more fish near the bottom," Siemens relayed. "When it's really tight to the bottom — walleye, splake — you're just seeing them better."
Bottom-hugging fish have always been among the more challenging targets for forward-facing sonar, where angular geometry can compress and obscure targets sitting tight to structure. The improved return quality of the LVS 44 addresses that weakness in a meaningful way.
No. 4: Water Detection Automatically Saves Battery Life
One of the most elegant additions to the LVS 44 is a feature that many anglers won't notice until they check their battery gauge and realize it's fuller than they expected: automatic water detection.
The transducer now detects when it has been lifted out of the water and automatically suspends its sonar operation, reducing current draw significantly. Siemens demonstrated this live using a Norsk Gap app to monitor his power consumption. With the transducer submerged, his 10-inch GPS map chartplotter and LVS 44 combined were drawing approximately 2.5 amps — projecting around nine hours of runtime on his 30-amp-hour battery.
The moment he lifted the transducer from the water, the display registered the change: "Water not detected." Current draw immediately dropped to 1.5 amps, and projected runtime jumped to over 14 hours.
"I'll be honest — I don't like to turn the transducer on and off every time when I'm hole hopping," Siemens admitted. "So I would just keep it on all the time when I'd been ice fishing with the LVS 34. The fact that now it just automatically turns off — now I have 14 hours."
Beyond the battery savings, Siemens noted that running any sonar transducer out of the water for extended periods is generally considered hard on the internal components over time, particularly the gyroscope. The automatic shutoff feature addresses both concerns simultaneously. For those who prefer full manual control, the water detection feature can be disabled entirely in the transducer's settings menu.
Mentioned in This Article
Eskimo Pole System Ice Fishing Sled Connector
Modular pole system for connecting and pulling ice fishing toboggans/sleds
No. 5: Settings Matter More Than Ever — Here's What to Dial In
The fifth and arguably most important thing to know about the LVS 44 is also the one most likely to be overlooked: this transducer requires deliberate setup. Plugging it in and expecting results identical to the LVS 34 on factory settings will leave many anglers disappointed — not because the hardware is worse, but because it needs to be configured differently to shine.
Siemens was clear that he waited several weeks before publishing his review specifically because he wanted time to properly learn the transducer's settings rather than offer a rushed first-impressions take.
"It's tough to just turn it on and do a video on it," he said. "It is important to learn it."
Drawing again from his conversation with the Garmin field technician, as well as his own experimentation, Siemens shared his complete settings breakdown for the LVS 44:
Gain / Sensitivity
Run your gain lower than you would on previous transducers — closer to the 60 range. Auto mode, which many experienced LiveScope users have historically avoided, is now worth trying. The Garmin tech himself had never used auto on previous units but now recommends it for the LVS 44, as it produces a clean image and adapts well to changing conditions.
Depth Range
Set your screen depth approximately 10 feet deeper than the actual water depth. If you're fishing in 25 feet of water, set your display to 35 feet. This reduces compression artifacts that appear when the image is zoomed in too tightly from the edges, producing a more accurate and usable picture.
Noise Reject and Ghost Reject
Set noise reject to medium or high. Set ghost reject to high or auto. These settings help eliminate false returns and interference that can clutter the image, particularly in environments with significant electrical noise or surface turbulence.
TVG (Time Variable Gain)
Siemens runs TVG off on his setup. This setting affects how the unit compensates for signal loss at depth and may need individual adjustment depending on water conditions.
Installation Depth
Set to two feet for Siemens's kayak configuration. This should reflect your actual transducer deployment depth and will vary by setup.
Color Gain and Color Limit
This is the most critical adjustment unique to the LVS 44. Unlike previous transducers where color gain and color limit were rarely touched, these two settings require active tuning on the newer units. Siemens recommends running color limit in the 80–90 range and color gain in the 75–85 range, adjusting based on water clarity. Running these values higher than you might expect is what unlocks the definition and contrast that makes the LVS 44's image quality stand out.
Range
Siemens keeps his range set to around 100 feet, noting that while the LVS 44 is capable of displaying beyond that, he finds 100 feet to be the sweet spot for image quality and fish identification at his typical fishing distances.
Color Palette
Amber was Siemens's palette of choice for the day, based on the recommendation of the Garmin field technician, who considers it the best option for image definition. Moss is also widely popular. Blue, which Siemens has historically favored, remains a viable option — but the advice is to experiment, particularly with water clarity varying from lake to lake.
LVS 42 vs. LVS 44: Knowing Which One Is Right for You
The LVS 44 wasn't the only new transducer Garmin released in the LiveScope 2 lineup, and Siemens took time to frame where the 44 fits relative to its sibling, the LVS 42 HD.
The LVS 42 HD is the more specialized of the two — built primarily with ice fishing in mind, optimized for shorter range and ultra-high-definition imaging suited to finesse presentations in close quarters. If you're a dedicated ice angler chasing panfish or walleye at tight distances with small baits, the 42 HD may be the better tool.
The LVS 44, by contrast, is best understood as a direct and improved successor to the beloved LVS 34. It's designed for the angler who wants versatility — walleye, bass, trout — at longer ranges. For anyone running deep-water species like muskie or lake trout in truly deep water, the LVS 62 remains the appropriate choice.
"Depends on how you fish and what sort of stuff you do," Siemens said. "If you're doing super deep water, the 62 is still a player. For people that want one geared towards ice fishing and within that 80-foot range, the 42 HD. The 44 is going to be great for people that want that replacement to the 34."
Mentioned in This Article
Daiwa Saltist 83 Spinning Rod
Long, forgiving spinning rod used for targeting stocked trout species
Five Trophy Splake, Five Lessons Learned
By the end of the day, Siemens had accomplished both of his objectives. The five things you need to know about LiveScope 2 were documented and demonstrated on camera, and five Master Angler–class splake had come over the side of the kayak — including a 24-inch splake he first called a personal best before remembering a fish of about 25 and a half inches, plus a hard-jumping rainbow of about 20 inches on a swimbait. Siemens got the splake pin he and Brandon had chased in a video the year before, this time in a single day.
The portage back out — gear loaded, body tired, hill just as steep as it was going in — was a little easier to endure with the evidence of what good technology and good preparation can produce together.
For anyone already running a LiveScope system and wondering whether the LVS 44 represents a worthwhile upgrade, Siemens's conclusion is nuanced but clear: the hardware improvements are real, the image quality is genuinely better, and the new features like water detection add practical everyday value. But the technology only delivers on its promise if you're willing to invest the time to dial it in properly.
"There are settings I've touched on the 44 that I never messed with on the 34," Siemens said. "So important. You need to have it dialed in."
Manitoba's backcountry splake lakes aren't going anywhere, and neither is forward-facing sonar. If the LVS 44 is on your radar, the lesson from this particular adventure is simple: do your homework before you get to the water — and maybe bring good shoes for the hill.
Based on a video by Jay Siemens on YouTube.